Two spur gears with true involute tooth profiles, generated mathematically in Fusion. Module 2, 20° pressure angle, 20-tooth pinion and 30-tooth gear, 50 mm centre distance, 8 mm face width and 5.2 mm bores for 5 mm shafts.
The Fusion source exposes module, z1, z2, thick, bore and pressure as user parameters, which makes it a good starting point for your own gear trains.
Printing tips: print flat on the bed with 3 walls and 40% infill. PETG or nylon wear best. Ream the bores if they are tight.
Included: Fusion .f3d source, STEP, IGES, and an STL for each gear.