3dprintables
A practical enclosure for Arduino, ESP32 and custom boards. Enter your board's length and width and everything else resizes to fit. User parameters: pcb_l 70 mm, pcb_w 50 mm, clr 2 mm, wall 2 mm, height 30 mm, corner_r 4 mm, standoff_d 6 mm, standoff_h 5 mm, screw_d 2.5 mm (pilot hole for M3 self-tapping screws), hole_inset 3.5 mm, lid_t 2.5 mm, lip_h 3 mm and fit 0.2 mm. Features: four screw standoffs, a USB/cable cut-out on each end wall, a press-fit lid with a locating lip and five vent slots. Included: Fusion .f3d source, STEP, IGES, and STLs for the base and lid.